Pre-Compiled Firmware for Default Pins
This is the recommended method of getting the firmware if you don't need custom config or pin defines.
Required Tools
You only need the following if you are using precompiled firmware:
- nRF Connect for Desktop (Programmer) for flashing Nordic or eByte Dongles only
- nRF Connect for Desktop (Serial Terminal) for sending commands to your Receiver/Trackers, see alternatives
- SlimeVR Server
- 0.13.2 or later version
Latest Builds (Automated)
📡 Receiver
🏃 Tracker
| Device | Stacked | Clock (ICM) | Sleep (WOM) Wake On Motion. | SW0 Disabled (no button) | SW0 Enabled (button) | SuperMini | ✖️ | ✖️ | ✅ | Link | Link |
| SuperMini | ✖️ | ✖️ | ✖️ | Link | Link |
| SuperMini | ✖️ | ✅ | ✅ | Link | Link |
| SuperMini | ✖️ | ✅ | ✖️ | Link | Link |
| SuperMini | 🥪 | ✅ | ✅ | Link | Link |
| SuperMini | 🥪 | ✅ | ✖️ | Link | Link |
| XIAO | ✖️ | ✖️ | ✅ | Link | Link |
| XIAO | ✖️ | ✖️ | ✖️ | Link | Link |
| XIAO | ✖️ | ✅ | ✅ | Link | Link |
| XIAO | ✖️ | ✅ | ✖️ | Link | Link |
| R3 | ✖️ | ✅ | ✅ | Link | N/A |
| R3 | ✖️ | ✅ | ✖️ | Link | N/A |
| SlimeVR Mini (Prototype 1) | ✖️ | ✅ | ✅ | Link | N/A |
| SlimeVR Mini (Prototype 1) | ✖️ | ✅ | ✖️ | Link | N/A |
| SlimeVR Mini (Prototype 2) | ✖️ | ✅ | ✅ | Link | N/A |
| SlimeVR Mini (Prototype 2) | ✖️ | ✅ | ✖️ | Link | N/A |
Previous Firmware Builds
Previous builds can be found here: https://github.com/Shine-Bright-Meow/SlimeNRF-Firmware-CI/actions
- Click on a successful workflow run ✅ for the specified date range.
- Scroll down to the Artifacts section.
- Download the desired device firmware.
- Extract the ZIP file.