Smol LED Codes

Table Of Contents

• LED Codes
  • 1 Short Blink Per Second - Pairing Mode
  • 1 Long Blink Per Second - Low Battery
  • 2 - 4 Long Blinks Every 5 Seconds - Error
    • 2 Blinks Every 5 Seconds - Sensor Error
    • 3 Blinks Every 5 Seconds - Connection Error
    • 4 Blinks Every 5 Seconds - Hardware Error
  • Fade On And Off - DFU Mode
  • Very short blink - Normal Operation Or Wake On Motion
• LED Codes While Plugged In
  • While Plugged In: Pulsing - Charging
  • While Plugged In: Off - Fully Charged

LED Codes

1 Short Blink Per Second - Pairing Mode

1 Long Blink Per Second - Low Battery

2 - 4 Long Blinks Every 5 Seconds - Error

2 Blinks Every 5 Seconds - Sensor Error

Troubleshooting Sensor Error

Check info command output. If it contain IMU: None and it IMU is soldered than there is no continuity on one of points or IMU soldered in wrong position.

If IMU soldered correctly try to test continuity using multimeter or resolder connections.

3 Blinks Every 5 Seconds - Connection Error

4 Blinks Every 5 Seconds - Hardware Error

Fade On And Off - DFU Mode

Very short blink - Normal Operation Or Wake On Motion

LED Codes While Plugged In

While Plugged In: Pulsing - Charging

While Plugged In: Off - Fully Charged