Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Smol LED Codes

Table Of Contents

Standard operation codes

While not plugged in:

LED StateStatus
Very short BlinkingNormal Operation Or Wake On Motion
1 Long Blink per secondLow battery
OffDeep sleep or dead battery

While plugged in:

LED StateStatus
PulsingCharging
OffFully charged

Pairing and flashing codes

LED StateStatus
1 Short Blink per secondPairing mode
Fading on and offDFU (firmware flash) mode

Error codes

LED StateStatus
2 Long Blinks every 5 secondsSensor error (see below)
3 Long Blinks every 5 secondsConnection error
4 Long Blinks every 5 secondsHardware error
Troubleshooting Sensor Error

Check info command output. If it contains IMU: None and the IMU is soldered, then there is no continuity on one of the solder points or the IMU is soldered in the wrong position.

If the IMU is soldered correctly, try testing continuity with a multimeter or resolder the connections.

Created by Shine Bright ✨, Depact and Seneral, formatted by otter_oasis.